highlander-bothy-angle-blue.jpg
Highlander Development v5 white.png

HIGHLANDEr 140


The Highlander I is no longer available for purchase bar a few remaining frames in our outlet store.

Are you an owner?

For spare parts please visit our online store, or if you cannot find the part contact us.

For User Manuals, please access via the links below.


The ultimate one bike quiver

The Highlander 140, conceived and tested in the wild Highlands of Scotland, is an all-conquering warrior of a bike.

Designed from the ground-up with the sole focus of creating the world's most capable trail bike. The Highlander 140 is as happy on all-day back-country epics as carving turns at the bike park.

The all-carbon Highlander 140 boasts 140mm of rear travel, 29" wheels, balanced geometry and a progressive leverage curve. Thanks to the high pivot point suspension design - the 140mm of rear travel has descending capabilities, especially when pushed hard, that rival bikes with far more rear travel.

The all-rounder nature of the Highlander 140 is carried forward with the balanced geometry, plenty of stand-over and the ability to run a super-long dropper defines the Highlander’s character as playful, composed, and most importantly, a confidence inspiring trail bike. This is a bike built to put a smile on your face wherever the trail takes you.

High Pivot Point

Deviate’s high pivot point, and the careful idler placement, mean the suspension performance on the Highlander is the best of all possible worlds. The rearward axle path lets the bike flow over rough terrain, and as the idler location controls anti-squat, the Highlander has negligible pedal kickback and a deliberate anti-squat curve which eliminates pedal induced suspension bob. The unique kinematics of a high pivot point design maintains chassis stability and geometry under heavy braking, meaning aggressive riding is rewarded.

What do the reviews say?

How to Buy?

The Highlander 140 is no longer available.

Are you an owner? For spare parts please visit our online store, or if you cannot find the part contact us.

Key Features

Material: Full Carbon Construction

Wheel Size: 29”

Rear Wheel Travel: 140 mm

Front Travel: 140 - 160 mm

Frame Weight: 3.2 kg

> Lifetime Warranty

> Crash Replacement

TECHNOLOGY

Our engineering team will not let us use any fancy acronyms, technical abbreviations or marketing jargon here. We are simply implementing some solid and well understood engineering principles to create the best performing trail bike possible! We are not re-writing the engineering text book here - just following it with some ingenuity. 

High Pivot Point

Every rear suspension system has a pivot point. The suspension design on the Highlander uses a high single pivot point which results in a rearward axle path allowing the rear wheel to move with the impact, while the bike continues to maintain forward momentum. It is a sensation that you will notice from your first ride and the result is that the Highlander has an ability to negotiate chunky terrain with a speed and confidence that plenty of bikes packing much more rear wheel travel can’t match. The careful idler placement, mean the suspension performance on the Highlander is the best of all possible worlds. This is because the idler location controls anti-squat, creating a deliberate +100% anti-squat curve which eliminates pedal induced suspension bob.

Suspension Kinematics

The unique kinematics of a high pivot point design, with its rearward axle path and high anti-rise means that under heavy braking chassis stability and the geometry are maintained - this simply means that aggressive riding is rewarded. The sensation of “the bike not holding you back” is very real on the Highlander and you’ll find yourself hitting lines that you’d have previously reserved for your downhill bike (or imagination).

Linkage

Our linkage is designed to offer a progressive leverage curve intended to offer support for harder and more aggressive riders. The progressive linkage means that high volume air shocks and coil shocks are compatible. The use of an idler means that the leverage ratio of the Highlander is tuned independently of anti-squat and pedal kickback (of which there is a negligible amount).

Idler

In order to control pedal kickback and anti-squat on a high pivot point bike we need to use an idler. Unlike non-idler equipped designs we can virtually eliminate pedal kickback while creating a balanced anti-squat curve which is controlled by the idler position. In the real world this means the bike pedals incredibly well, without bobbing, while the suspension remains active providing traction. The lack of pedal kickback is instantly noticeable with the Highlander showing an uncanny ability to pedal smoothly through rough terrain. 

FEATURES

  • 18t chain idler - completely silent with twin outboard fully sealed bearings with grease injection ports.

  • 126 link chain - commonly available with no need to join chains.

  • Sealed bearings - high quality Enduro double row, angular contact max fill bearings.

  • Grease ports - fitted to all pivot and idler bearings in the name of riding all winter!

  • Cable channel - clean lines and easy maintenance.

  • Frame protection - bonded rubber frame protection to protect from rock strikes and chain slap.

  • 2.8” tyre clearance

  • Boost 148

  • Threaded BB

  • Water bottle compatible

  • Accessory mounting points

Component Standards

Rear Wheel: 29”, Boost: 148mm * 12mm

Fork Compatibility: 29” 150-160mm with 44/42mm offset

Bottom Bracket: 73mm BSA Threaded

Headset: ZS44/28.6 upper and a ZS56/40 lower headset cup

Cranks: Minimum Q-factor of 168mm

Chainline: 52mm

Chain length: 126 links (widely available, no need to join chains)

Max Chainring Size: 36t

Shock Size: Metric 210*55mm

Shock Hardware: Front: 30*8mm | Rear: bushing

Brake Mount: Post Mount 180mm

Seatpost Compatibility: Internal dropper routing with internal cable routing. 31.6”, Max Insertion Depth: Medium:- 300mm, Large:- 330mm (that's a 200mm Reverb at full insertion even on the M)

Seat Collar: 34.9mm

Rear Axle: M12xP1.75 | 192mm long | Thread length is 26mm (minimum 20mm)

GEOMETRY

This is the official published geometry and is correct for the specified fork. Geometry from some sources differs due to different forks or prototype linkages used during reviews.

SIZING GUIDE

FAQ

How much sag should I run?

We suggest around 30% for most riders, but this should be experimented with.

Do I need to join chains?

No - a standard 126 link chain will work with even a 12 speed Shimano or Sram set-up.

What headset do I need?

ZS44/28.6 upper and a ZS56/40 lower headset cup

Can I mount a chainguide to The Highlander?

Yes, we have two lower ISCG-05 tabs which allow the use of a lower guide/bash. For example the e.thirteen LG1+ Lower Only Guide.

Can I fit 27.5” wheels to the Highlander?

We have not designed the Highlander to work with 27.5” or 27.5”+ wheels.

What fork would you recommend?

We suggest a 140-160mm fork with a 44mm offset. A 51mm offset is compatible and will lead to a slightly more lively steering feel. 

What type of shock can I use?

The Highlander works with most coil or air shocks on the market and it is recommended that a mid-mid tune is used. We can’t guarantee that a specific shock will have clearance. The shocks available on our online store are all compatible. We are aware that Rock Shox Super Deluxe Air shocks DO NOT FIT. 

What chainring size should I use?

Anything from 28t to 36t will work great depending on how steep your hills are!

Can I use an oval chainring?

It is technically possible to run an oval chainring - however, you need to have a crank set and chainring combination that can be “clocked” to account for the idler wheels timing. This process will require some experimentation and as such we cannot recommend to offer support on installation.

What is the maximum tyre width?

2.8” - however, it does depend somewhat on the tyre manufacture so please check your chosen tyre does not rub the frame when cornering.

What is in the box?

In the box along with the frameset we’ll also include a rear axle (with a non-compressible sheath fitted for transit). There will be a mech hanger and idler wheel installed on the frame as well as a seat collar. A Manual for the shock you have chosen will be included.